VarTech Systems VT420 Series User Manual Download Page 41

Page: 41 / 43

Installing the wall mount kit:

1. Follow the manual instructions for the type of mount you have selected. Refer all servicing to qualified

service personnel.

2. Moving the monitor requires at least two people.

3. Before installing, please make sure the wall is strong enough to hold the necessary weight of the

display and the mount.

Step1.

Keep the display facing the ground and place it on a flat object.

Step2.

Remove the 4 screws (M8*15) from the back of the monitor.

Step3.

Align the wall brackets with the mounting holes and attach the brackets to the monitor using the

screws removed in Step 2.

Caution: Longer screws will damage the monitor.

Use maximum 15mm/0.59” long screws.
8mm Metric

Remove the 4 screws from

back of the monitor

VT420 Series

www.vartechsystems.com

Summary of Contents for VT420 Series












































Search results

Summary of Contents for VT420 Series

Reviews:

Related manuals for VT420 Series

Brands by name

Popular brands

VarTech Systems VT420 Series, User Manual

Search results

Summary of Contents for VT420 Series

Reviews:

Related manuals for VT420 Series

Brands by name

Popular brands