VarTech Systems VT084XHB User Manual Download Page 20

 

 

X-Series  All Weather User Guide                                                    20                                                                                          150-092 

SPECIFICATIONS

SPECIFICATIONS

  

Section 

ENGINEERING SPECIFICATIONS

 

Panel Size 

 

8.4”, 10.4” or 12.1” 

Type   

Color Active Matrix TFT LCD (16-bit Color) 

Resolution Capabilities 

VGA to SVGA 

Protective Glass 

Chem hardened with Anti-Reflective Coating, Bonded to LCD for Anti-fogging  

Pixel Format 

640 x 480, 800 x 600 

Brightness 

 

Enhanced Daylight Readable 600 nits(cd/m

2

) plus transflective quality 

Touch Screen (Optional) 

Analog resistive touch, 256x256 

MTBF 

30,000 Hrs.  

Computer Video Input   

VGA Monitor from a PC, Generic RGB configuration, Auto-Scale up-down to any 
resolution (for the best quality picture, set PC display resolution to match the LCD 
native resolution) 

Cables, Connectors 

Power  - 20 ft. (6m) Sealed Quick connect to 2-wire pigtail DC 
PC Video  - 20 ft. (6m) Sealed Quick connect to 15-pin D-SUB M 
PC Serial  - 20 ft. (6m) Sealed Quick connect to 9-pin D-SUB F 

Bezel 

Milled Aluminum, Anodized (Black or Gray), Bright Dipped, Sealed to NEMA 6P 
IP68  

Mounting 

RAM Pedestal Mount or Panel Mount with rear stud mounting kit 

Operating Temperature  
(Air Ambient) 

0 to 50ºC (32 to 122ºF), optional –40ºC available 

Storage Temperature   
(Air Ambient) 

-55 to 75ºC (-67 to 167ºF) 

Relative Humidity 

5 to 95%NC 

Shock  

10G 

Vibration Operating 
(@5-500 Hz sine sweep) 

1G 

Vibration Operating 
(@5-500 Hz sine sweep) 

3G 

*Outdoor Brightness Equivalent (Varies depending upon sunlight brightness) 

 

Internal Storage Temperature  

-55 to 75ºC (-67 to 167ºF) 

Internal Operating Temperature  

0 to 70ºC (32 to 158ºF) 

Electrical 

12 VDC , 120/240 VAC 

Frequency  

DC Input, 45-75 Hz 

Voltage 

+20/-20% rating, 100-250 VAC 

Summary of Contents for VT084XHB























Reviews: