Installation
92
Please note:
If the VARTA Link is used
as current sensor, enter the
IP address
of
the
VARTA Link
.
Press
"Connect"
.
The coupled storage system is displayed
in the respective overview.
After coupling of a storage system and
retrieval of the storage system data by the
VARTA pulse neo, the "Cascade monitor"
is displayed.
It provides a full overview of the cascade:
Charging state of the cascade,
the current power,
the max. capacity of the cascade.
If several storage systems are to be
connected, repeat the installation in the
"Cascade manager".
Please note:
Up to 5 devices can be
coupled.
Please note:
Do not forget to complete
the guarantee registration of the energy
storage system in the VARTA portal.
Make sure that the device is connected to
the local network with an active internet
connection.
Summary of Contents for Pulse neo 3
