Varta Pulse neo 3, Operating Manual

Page: 58 / 148

Installation
58
Connections at the distribution
The following connections must be
prepared:
Device connection:
„ Recommendation: 3 x 2.5 mm²,
„ Sensor cable: RJ12 (in scope of
delivery),
„ LAN connection.
Do not expose the sensor cable to
mechanical loads.
To keep losses as low as possible, the
line between the storage system and the
connection should have a
maximum
length of 20 m.
Preparation of AC connection to building
network
For connection to the building network,
the 3-wire AC connection line must be
connected to the provided AC connector.
„ At the end of the connection line, strip
the insulation by 55 mm.