background image

15 

 

IMPORTANT! 

Warranty Activation/Installation & Completion Sign Off Sheet 

 
NOTE: This sheet must be completely filled out and returned/faxed (270) 753-3773 to Scoreboard 
Service Company before your warranty can be activated. 
 
Your Serial Number _______________________________________ 
 
Your Model Number _______________________________________ 
 
Date Purchased       _______________________________________ 
 
Sales Agent             _______________________________________ 
 
Person Authorizing Purchase (title) ____________________________ 
 
Date Installation Completed   _________________________________ 
 
Company or Person Responsible  
For Installation (address/phone number) ________________________ 
 

 
This document confirms that the installation for the 6-ft.x 24-ft. Football Scoreboard has been 
completed. All structural, wiring, and power requirements have been met. This unit has been 
tested in scoring and diagnostic modes, ensuring the functionally of the unit. 
 
 
___________________________________ 
Scoring/timing equipment responsible party 
 
 
________________________________ 
Installer 
  
So that we may better serve you, please have this information available in the event you need to 
call technical support. Customer Service:     1-800-411-3136 

 

Summary of Contents for VSBX-744LED
















Reviews: