SERVICE
12
SYSTEM OPTIONS
Display View – Main menu
Main menu is visible for the consumer
Minimum temperature.
The temperature can be changed through pressure and again release of the button, the
operating temperature will then flash. By turning the button, the desired minimum water
temperature will occur. If the desired temperature is reached, the button is pressed
again for acceptance. The minimum temperature is normally about.
"35°C"
. If the
water temperature become lower than
"T min"
, the additional heating system will be
activated, if you in the menu
"H.pump"
have selected, e.g.
"HP+EL"
(or HP+Boil if
boiler is installed)
Select the combination of the Heat source.
There are the following options in the program:
"OUT", "HP", "EL", "HP+EL","BOILER", "HP+BOIL"
.
If no boiler is installed, the last 2 combinations are not in use
Similar function as T min. Used for “Draw Down function" and
"Holiday" function . The factory setting is "10 ° C".