SERVICE
11
SYSTEM OPTIONS
Display View – Main menu
Main menu is visible for the consumer
Shows the different alarms that can appear.
Up to 3 alarms are shown. ”0” = no alarm.
See alarm descriptions later in the service instructions.
Alarms are reset through pressure of the button.
Shows the current operating condition of the heat pump.
The following announcements can occur:
”off” = switched off
”Standby” = standby
”H.Water” = Works
”Legionel” = 65°C heating up in course (once a week)
”Def.Gas / Def. Stop” = Defrost condition
Shows the adjusted operating temperature.
Please note! This is an average temperature and not the hot water
output.
The temperature can be changed through pressure and again released
of the button, the operating temperature will then flash. By turning the
button, the desired water temperature will occur. If the desired water
temperature is reached, the button is pressed again for acceptance. The
standard factory setting temperature is
"45°C"
.
