3
you have fully recovered from any symptoms. If you
continue to experience these symptoms, consult a
doctor.
Interference with medical
devices
The headset may emit radio waves, which could
affect the operation of nearby electronics, including
cardiac pacemakers, hearing aids and defibrillators.
If you have a pacemaker or other implanted
medical device, do not use the headset without first
consulting a doctor or the manufacturer of your
medical device. Maintain a safe distance between
the headset and your medical devices, and stop
using the headset if you observe any interference
with your medical device.
Hearing loss
Excessive exposure to loud sounds can
cause hearing damage. When you start using
compatible headphones with the headset, start
with the volume at a low level and then increase the
volume slowly. Do not turn up the volume too high.
Electrical shock
Do not try to disassemble, open, service, or
modify the headset or power supply unit, as it can
lead to electrical shock or other hazards and may
damage the headset or the power supply unit. For
PLUGGABLE EQUIPMENT, the socket-outlet shall
be installed near the equipment and shall be easily
accessible.
Use the headset only with the power supply unit
(Salcomp S51A00, INPUT 100-240V~, 50-60Hz,
1.3A, OUTPUT 5V/3A, 9V/3A, 15V/3A, 20V/3A) and
Link Box (LB-1) included in the sales box. Using
other power supply units may be dangerous.
Damaged or broken device
Do not use the headset if any part is
broken or damaged, the provided cables are torn, or
any wires are exposed. Do not try to repair any part
of the headset yourself. Repairs should be made
only by an authorized service facility or Varjo.
Contagious conditions
To avoid transferring contagious
conditions, do not share the headset with persons
with contagious conditions, infections, or diseases,
particularly of the eyes, skin, or scalp.
Skin irritation
Stop using the headset if you experience
swelling, itchiness, or other irritation. If the
symptoms persist, consult a doctor.
Safety information
To prevent injury to yourself or others or damage to
your headset, read this safety information before
using it.
Safe and comfortable use
When you put on the headset for the first time,
follow the instructions on how to position the
headset on your face correctly. Loosen the headset
first by opening the head strap, and then turning the
adjustment wheel. Put the headset on, and tighten
the headset by first turning the adjustment wheel,
and then tightening the head strap. There should
be no pain or pressure on your head, and the face
mask should feel comfortable on your face.
