1 IDENTIFICATION
1.1 Manufacturer
VARISCO POMPE Srl Zona Ind. Nord - Terza Strada, 9 - 35129 PADOVA
1.2 Type of pump
Self-priming horizontal axis gear pump
1.3 Model
The model is indicated on the nameplate of the pump.
1.4 Year of manufacture
The year of manufacture is indicated on the nameplate of the pump.
1.5 Identification of the manual
Prepared: January 2002
Edition : 04
Rev.: 00
Date of revision.:
1.6 Nameplate information
The values indicated on the nameplate refer to testing with oil at 20° C and viscosity of 100 cSt
1.7 Field of application
The pumps are suitable for handling liquids of a viscosity up to 1000 cSt.
.
1.8 In case of breakdown
Telephone the following number:
049 82 94 111
2 WARRANTY
-
The manufacturer guarantees that only high quality materials are used in the construction of the pumps and that machining and assembly are
carried out to the highest standards.
-
The pumps are guaranteed against defective materials or faulty workmanship for a period of one year from the date of delivery unless
otherwise specifically stated in writing.
- The warranty is not valid if the pump has been tampered with by third parties.
-
Replacement of parts of the pump itself can only be carried out after careful examination of the pump in an authorised workshop by qualified
personnel. The pump should be sent carriage paid.
-
This guarantee does not cover parts subject to deterioration or normal wear and tear (seals, diaphragms, pressure and vacuum gauges,
rubber or plastic items, etc.) or damage caused by misuse or improper handling of the pump by the end user.
-
Parts replaced under guarantee become the property of the manufacturer.
3 GENERAL INSTRUCTIONS
The Goods must be examined upon arrival in order to ascertain any damage that may have occurred during transportation. Loss or damage
must be notified immediately to the carriers and the sender. Check that the goods correspond exactly to the description indicated in the
shipping documents and report any differences as soon as possible to the sender. Always quote the pump type and serial number stamped
on the nameplate.
The pumps must be used only in applications intended by the manufacturer:
- the construction material
- the operating conditions ( pressure, speed, temperature, etc.)
- the field of application
In case of doubt, contact the Technical Department of VARISCO POMPE at the following number:
049 82 94 111
4
TYPE
Identifies the model of the
pump
and/or
unit
(pump/gear/motor).
TYPE
MATR.
ITEM
m
3
/h (max) m (max)
kW
RPM (max)
kg
MATR.
the serial
number of
the pump
ITEM
the number which links the pump
to the contract documents
( only if requested)
kg
the weight of the unit (pump,
reducer, basement, trolley etc.)
excluding the weight of the liquid
in the pump casing and fuel in the
fuel tank
Year of manufacture
m
3
/h
(max)
the maximum capacity of
the pump, measured at
the maximum speed
(RPM)
m
(max)
the maximum working
pressure of the pump
measured at the maximum
speed (RPM)
kW
the maximum output
power of the pump at the
maximum speed (RPM)
RPM
(max)
the maximum operating revs
range of the pump. The pump
must never
be run faster than this
rev range
