Varimixer V30K, Spare Part And Operation Manual

Page: 5 / 32

5
t
ransport
:
Lifting equipment should always be used to move the machine.
The machine must not be pulled or lifted by the bowl lift handle.
When the machine is moved, it should be in a vertical position at all times.
i
nstallation and adjUstments
:
The ambient temperature around the machine must not exceed 113
o
F.
When the mixer is delivered, the adjustable feet will be turned right to the
bottom.
The height of the legs should be adjusted so that the bowl on
the bowl trolley fits perfectly into the bowl arms.
The bowl arms should be at the correct height above the floor before
the machine is taken into use – see Adjustments .
Adjustments:
Together with the mixer
comes a 32 mm fixed
spanner to be used for
adjustments.
To raise leg
turn
clockwise
To lower leg
turn
anticlockwise
It is of the outmost importance that the legs of the machine are
adjusted so that the conditions in the following sketch are met.
Condition 1:
The top of the mixer must be parallel to the floor. To ensure this you must measure
the distance from the top of the machine to the floor:
The dimension must be the same when measured at the front of the mixer
and at the rear of the mixer:
Condition 2
The mixer must be height adjusted so that the bowl on the bowl trolley fits exactly
in the bowl arms:
Basically, the dimension from floor to centre of the knobs on the bowl arms must
be 34
1/16
”. If the bowl on the bowl trolley does not fit exactly in the bowl arms
at this dimension, adjust slightly on the front legs of the mixer.
1 2
86,5cm