Varimixer RV 10 VL-2 Operating Instructions Manual Download Page 19

Page: 19 / 20

Innehåll i örsäkran om maskinens överensstämmelse, (Maskindirektivet 2006/42/EG, bilaga 2, A)

Contenuto della dichiarazione di conformità per macchine, (Direttiva 2006/42/CE, Allegato II, parte A)

Sisukord masina vastavusdeklaratsioon , (Masinadirektiiv 2006/42/EÜ, lisa II, punkt A)

Treść Deklaracja zgodności dla maszyn (Dyrektywa maszynowa 2006/42/WE, Załącznik II, pkt A)

Sisältö vaatimustenmukaisuusvakuutus koneesta (Konedirektiivi 2006/42/EY, Liite II A)

Tillverkare; Fabbricante; Tootja; Producent; Valmistaja:

Varimixer A/S

………………………………………………………………….……

Adress; Indirizzo; Aadress; Adres;

Osoite:

Kirkebjerg Søpark 6, DK-2605 Brøndby, Denmark

……………………………………………………………………….

Namn och adress till den person som är behörig att ställa samman den tekniska dokumentationen:

Nome e indirizzo della persona autorizzata a costituire il fascicolo tecnico

Tehnilise kausta volitatud koostaja nimi ja aadress

Imię i nazwisko oraz adres osoby upoważnionej do przygotowania dokumentacji technicznej

Henkilön nimi ja osoite, joka on valtuutettu kokoamaan teknisen tiedoston

Namn; Nome e cognome; Nimi; Imię i nazwisko;

Nimi

Kim Jensen

……………………………………………………………………….

Adress; Indirizzo; Aadress; Adres; Osoite:

Kirkebjerg Søpark 6, DK-2605 Brøndby, Denmark

.........................................................................

Ort och datum; Luogo e data; Koht, kuupäev; Miejscowość, data; Paikka, aika:

Brøndby, 14-03-2018

........................................................................

Försäkrar härmed att denna blandningsmaskin

Con la presente si dichiara che questo mixer planetaria

Deklareerime käesolevaga, et Planetaarmikseri

Niniejszym oświadczamy, że mikser planetarny

vakuuttaa, että tämä mikseri tyyppi

•

överensstämmer med tillämpliga bestämmelser i maskindirektivet (2006/42/EG)

is è conforme alle disposizioni della Direttiva Macchine (Direttiva 2006/42/CE)

vastab kehtivatele masinadirektiivi (2006/42/EÜ) nõuetele

spełnia wymagania odpowiednich przepisów dyrektywy maszynowej (2006/42/WE)

on konedirektiivin (2006/42/EY) asiaankuuluvien säännösten mukainen

•

överensstämmer med bestämmelser i följande andra EG-direktiv

è conforme alle disposizioni delle seguenti altre direttive CE

vastab järgmiste EÜ direktiivide nõuetele

spełnia wymagania przepisów innych dyrektyw WE

on seuraavien muiden EY-direktiivien säännösten mukainen

2014/30/EU; 1935/2004 ; 10/2011 ;

2023/2006 ; RoHS 2011/65/EU ; 822/2013 (DK only)

…………………………………………………………………………………………………………………………………………………….…...

Vi försäkrar dessutom att

e che

Lisaks ülaltoodule deklareerime, et

Ponadto oświadczamy, że

ja lisäksi vakuuttaa, että

•

följande (delar/paragrafer av) europeiska harmoniserade standarder har använts

sono state applicate le seguenti (parti/clausole di) norme armonizzate

kasutatud on järgmisi Euroopa harmoniseeritud standardeid (või nende osi/nõudeid)

zastosowano następujące części/klauzule zharmonizowanych norm europejskich

seuraavia eurooppalaisia yhdenmukaistettuja standardeja (tai niiden osia/kohtia) on sovellettu

EN454:2014 ; EN60204-1:2006; EN12100-2011

……………………………………………………………………………………………………………………………………..................

EN61000-6-1:2007; EN61000-6-3:2007

……………………………………………………………………………………………………………………………………...

DS/EN 1672-2 + A1:2009

……………………………………………………………………………………………………………………………………...

Summary of Contents for RV 10 VL-2





















Search results

Summary of Contents for RV 10 VL-2

Reviews:

Related manuals for RV 10 VL-2

Brands by name

Popular brands

Varimixer RV 10 VL-2, Operating Instructions Manual

Search results

Summary of Contents for RV 10 VL-2

Reviews:

Related manuals for RV 10 VL-2

Brands by name

Popular brands