user manual
w w w.va r i - l i t e .co m
VL3600 PROFILE IP
50
SERVICE
Service Settings - Password protected
This is for the use of authorized service personnel only. Refer to Service Manual for information.
USB
Log File
Saves a .csv file on the usb drive that contains information about the unit, including settings and previous
error messages.
Save Config
Saves the current configuration of the fixture (including all settings) that can then be restored into another
fixture (i.e., replacing a unit in a system).
Restore Config
Allows the configuration that was saved to the USB in another fixture to be loaded into this fixture. Note
the Config needs to have already been loaded onto the USB drive (see previous).
Save Presets
Stores the current presets on the USB drive. These can then be loaded into a different fixture or back into
the same unit.
Restore Presets
Load the saved presets on the USB drive into the current fixture. Note they presets need to have already
been loaded onto the USB drive (see previous).
Update OS
A USB drive may be used to update the firmware of the fixture. Visit
www.vari-lite.com
to download
the latest version. Save to the root level of the USB drive. Install drive into the USB port on the connector
panel. Choose Update OS from the menu. Select the version you wish to install and touch [ENTER]. Soft-
ware will install.
Diagnostics
Fan Check
Displays all fan speeds in RPM.
LED Temp
Displays the current and maximum temperature (since the last power cycle) of the LED engine in °C.
TEST
ALL TEST
Runs the self-test of all functions. To stop the test, press [MENU].
PAN/TILT TEST
Runs the self-test of pan/tilt. to stop the test, press [MENU].
TEST CHANNEL
Choose the function you wish to test from the list and touch [ENTER]. The self-test will run. To stop the
test touch [MENU].
