Page 15
© 2013 Cascade Designs, Inc.
Installation Instructions
Operating Instructions
Removing the Icon Back System
1. Depress buttons and slide the left and right Slide Caps open.
2. Grab the top of the shell and lift up until the Slide Bars clear the Holster.
3. Slide the left and right Slide Caps closed, towards the Shell.
Inserting the Icon Back System
1. Depress buttons and slide the left and right Slide Caps open, away from the
Shell.
2. Align the Slide Brackets above the track of the Holsters.
3. Insert the Slide Brackets into the Holsters.
4. Slide the left and right Slide Caps closed, towards the Shell.
Permanent Mount Installation
1. Loosen the left and right Slide Bracket Screws.
2. Install the Permanent Mount Screw using the 3-32 in. hex key through the
Permanent Mount Hole into the Slide Bracket.
3. Tighten the left and right Slide Bracket Screws.
