Page 13
© 2013 Cascade Designs, Inc.
Installation Instructions
The following steps can be done with or without someone in the wheelchair:
Depth and Angle Adjustments
1. Loosen the two Cane Bracket
Adjustment Screws and adjust
for desired level of depth and
angle.
Only loosen adjustment
screws 3/4 of a turn to slide.
Do not disconnect from the
attached nut.
2. Use reference marks on the
top of the Holster to make
incremental adjustments.
3. Adjust the hardware on both
Cane Brackets before fully
tightening the adjustment
screws.
4. Tighten the two Cane Bracket Adjustment Screws to maintain the adjustment.
Horizontal Shell Bracket
Adjustment
1. Loosen the two Slide Bracket
Screws.
2. Make lateral Shell adjustments.
3. Retighten the screws
.
Vertical Shell Bracket
Adjustment
1. Loosen the two screws on each
Shell Bracket.
2. Make vertical shell
adjustments.
3. Retighten the screws
.
Adjustment Steps
HORIZONTAL
ADJUSTMENTS:
SLIDE BRACKET
SCREWS
VERTICAL
ADJUSTMENTS:
SHELL BRACKET
SCREWS
CANE BRACKET
ADJUSTMENT
SCREWS
