ProStar 400 Autosampler Control Manual
-16-
03-914947-28:R1
Communication Window
Communication Settings parameter group:
In the
Name
field, select the name of the bus previously
configured with the
Communication
Server Configuration
program.
In the
Autosampler Device Identifier
field, enter the device
identifier of the ProStar 400 Autosampler.
NOTE:
To find or set the address on the sampler itself, you must press the “
F
” and “
4
”
buttons, then the “
PROG/END
” button to access the device identifier setting.
NOTE:
For more details about the Bus configuration, refer to the
Configuring the
Communication Server
section
in this manual.
