ProStar 400 Autosampler Control Manual
-10-
03-914947-28:R1
connected. This Star 800 MIB must have been configured in the
Star 800 MIB Configuration
program prior to running the
Communication
Program.
NOTE:
For more information about the configuration of the Star 800 MIB interface, refer
to the Configuration Manager User’s Guide.
Select the number of the
Serial Port
to
which the instrument is
connected (on the computer or the Star 800 MIB box).
Enter the following communication parameters in the
corresponding fields, available for the ProStar 400 Autosampler
module:
Stops
1 Stop
Baud
19200
Parity
EVEN
Bits
8 Bits
Flow Control
NONE
Buffer Tx
4096
Buffer Rx
4096
Once the configuration of the required hardware is correctly
done, click on
OK
to validate (or click on
Cancel
to not change
the configuration).
The new hardware is now displayed in the main
Hardware
Configuration
screen:
