EN
3
Remove the plug from the mains immediately if cable is damaged
or cut.
Hold the chain saw with both hands.
Right way of operation.
Bar length 400 mm, maximum cutting length 370 mm.
Double insulation.
Recycle unwanted materials instead of disposing of them as
waste. All tools, hoses and packaging should be sorted, taken to
the local recycling centre and disposed of in an environmentally
safe way.
General safety instructions
WARNING
!
Read all safety warnings and all instructions.
Failure to follow the warnings and instructions may
result in electric shock, fire and/or serious injury.
Save all warnings and instructions for future reference.
The term "power tool" in the warnings refers to your mains-operated (corded) power tool.
Work area safety
1)
Keep work area clean and well lit. Cluttered or dark areas invite accidents.
2)
Do not operate power tools in explosive atmospheres, such as in the presence of flammable
liquids, gases or dust. Power tools create sparks which may ignite the dust or fumes.
3)
Keep children and bystanders away while operating a power tool. Distractions can cause you
to lose control.
Electrical safety
1)
Power tool plugs must match the outlet. Never modify the plug in any way. Do not use any
adapter plugs with earthed (grounded) power tools. Unmodified plugs and matching outlets
will reduce risk of electric shock.
2)
Avoid body contact with earthed or grounded surfaces, such as pipes, radiators, ranges and
refrigerators. There is an increased risk of electric shock if your body is earthed or grounded.
3)
Do not expose power tools to rain or wet conditions. Water entering a power tool will
increase the risk of electric shock.
4)
Do not abuse the cord. Never use the cord for carrying, pulling or unplugging the power tool.
Keep cord away from heat, oil, sharp edges or moving parts. Damaged or entangled cords
increase the risk of electric shock.