EN
12
Specifications
Model
VARI 2300 W (GT5221/SCS723A)
Nominal voltage
230 V ~ 50 Hz
Power
2300 W
Electric engine no load speed
5600 min
-1
Chain speed
13 m/s
Bar length
16“ (40 cm)
Chain pitch
9,525 mm
Chain gauge
1,27 mm
Sprocket
7 x 9,525
Insulation class
Class II
Net weight
4,7 kg
Type of saw chain
Oregon 91PJ056X
Type of guide bar
Oregon 160SDEA074
Declared noise and vibrations values
Declared emission level of acoustic pressure A at operator’s site L
pAd
(according to CSN EN ISO
22868 Appendix B and CSN EN ISO 11201): 93
3,0
dB
Guaranteed level of acoustic performance of the machine L
WA
(according to Decree of the
Government No. 9/2002 Gaz. Appendix No. 3, Part B, Point 25 and CSN ISO 3744): 110 dB
Declared aggregate value of accelerated vibrations transmitted onto operator’s hands/arms a
hvd
(according to CSN EN ISO 22867 and CSN EN ISO 20643): 6,5
1,5
m/s
2
With respect to the fact that the declared levels of acoustic pressure A at operator’s site exceed
the value of 85 dB, it is necessary to use personal noise protective aids.
With respect to the exceeded recommended values of noise and vibrations, you are warned to
observe the following instructions when working with the machine:
a)
Protect your hearing by using suitable protective aids specified in CSN EN 352-1 (shell ear
protectors) or CSN EN 352-2 (plug ear protectors). Require the aids from your dealer.
b)
Working with the machine should be interrupted after max. 20 minutes for a minimum
break of 10 minutes. During these breaks, the machine operator must not be exposed to
the impact of another source of noise or vibrations.
c)
Machine operators should use working aids authorized to CSN EN 166 or CSN EN 1731
(tight-fitting garments, sturdy shoes, working gloves and protection glasses).
Guaranteed level of acoustic performance L
WA
= 110 dB
The electric chain saw VARI 2300 W is manufactured by SUMEC Hardware & Tools Co., Ltd., 1#
Xinghuo Road, National Level Nanjing High-Tech Zone, Nanjing, 210061, P. R. China.
Importer to EU and distributor: VARI, a.s., Opolanska 350, 289 07 Libice nad Cidlinou, Czech
Republic.
Disposal of packaging and machine after the end of service life
After unpacking the machine, you are obliged to provide for the disposal of packaging material
with taking into account the use of secondary raw materials according to national waste laws and
regulations.