Lucina MaX
/
Dorotha
2.7 P
ICTURE
APPENDIX
The attached illustrations are common for all language versions. hey can be found at the end of this manual in Chapter
, page
1
Folded handlebars
2
Battery - BDR-620DBiS only
3
Cutting disk top cover
4
Package with small parts
5
Flap long and short
6
Charger - BDR-620DBiS only
7
Flap holder
8
Left (lower) additional disc cover
Pict. 1: Machine Unpackaging
1
Cutting disk top cover
2
Front handle
3
Side cover with a holder
4
Cutting disk
5
Blade (4 pcs)
6
Drive cover
7
Bolt
8
Engine/Battery
9
Side cover screw
10
Cutting disk bottom cover
11
Machine frame
12
Tank cap
13
Gearbox cover
14
Strap with cables
15
Wheels
16
Handle
17
Disk drive clutch lever
18
Lock button
19
Travel clutch lever
20A
Páčka akcelerátoru
20B
Starter panel
Pict. 2: Main Machine Components
Switch:
STOP
- Running engine stop. (Ignition coil shorting.)
1
- Starting circuit wiring.
Button:
START
- Engine starting
only
with its switch in position
1
.
Do not start the engine with its switch in position
STOP
.
Pict. 3: Starter panel
1
STOP
position
The engine is not running.
It is used to turn off a running engine.
Engine shutdown.
Refueling.
Machine transport.
3
MAX
position
The engine runs at its maximum speed. (Hare sign)
Working position
2
MIN
position
Engine is idling. (Turtle sign)
Short work brake.
4
CHOKE
position
The engine choke is engaged.
Cold engine start.
It is not used in automatic choke engines.
Pict. 4: Accelerator lever position
HARE
2
nd
gear
TURTLE
1
nd
gear
Pict. 5: Gears
Pict. 6: The machine's working width
Pict. 7; 8: Lubrication point
Pict. 9: Machine Assembly Procedure
Pict. 10; 11: Lubrication point
1
Gearbox cover
2
Gearbox botton cover
3
Plastic nut
4
Foot / protrusion
Pict. 12: Rear covers
Pict. 13: Travel tensioning pulley adjustment
Pict. 14: Disc drive clutch pulley - Brake
Pict. 15: V-belt path
Pict. 16: Safety pictogram - Machine travel
Pict. 17: Safety pictogram - Disk starting
Position on the machine
Pict. 18: Safety labels - Combined sticker
33
R
ev
iz
e
1
0
/2
0
2
0
