background image

 M

AINTENANCE

 : 

 2

0 2 . 9 6 8 3 . 0 0 1 0   0

2 5   M a r c h   2 0 1 1

35

Step

9. As indicated in 

Figure 14

, at light baffle, remove three 6-32x1/8" PPB screws.

Figure 14:  Heatsink Assembly - Lamp Socket Removal

Step 10. Remove light baffle.

Step 11. Loosen, but do not remove, three 1/4" hex standoffs and turn reflector clips out of 

way and remove reflector.

Step 12. Remove yoke arm cover opposite display side by removing four 6-32x3/8" LG PTB 

screws.

Step 13. If applicable, remove dimmer. See, 

“IGBT Dimmer Replacement - VL550D Only” on 

page 45

 for IGBT dimmer removal.

Step 14. At inside of side rail, remove two 4-40x1/8" LG PPB screws and remove Lamp 

Wire Cover.

Step 15. At support rib closest to tilt tube, remove one 6-32x1/4" LG PPG screw and remove 

ground strap.

Step 16. Remove tilt tube plug and pass lamp wires through tilt tube.

Step 17. Inside heatsink, remove four 8-32x1/2" LG PPZ SEM screws and remove back cap

Step 18. Remove heatsink light leak foam and pass lamp wire through heatsink.

Step 19. At socket, remove two 6-32x1/4" LG PPZ SEM screws and remove socket.

Step 20. Replace by performing Steps 3 through 19 in reverse order.

Light Leak Foam

Lamp Socket

Reflector

Light Baffle

6-32x1/8" PPB Screws (x3)

6-32x1/4" PPZ 

Screws (x2)

1/4" Hex Standoff (x3)

Reflector Clips (x3)

8-32x1/2" PPZ SEM Screws (x4)

Backcap

Summary of Contents for VL550





































































































































Reviews: