I
NSTALLATION
: I
NSTALLATION
P
ROCEDURES
2
02.9685.0001 0
01-March-2006
17
Step 4. Connect power and data cables according to procedure given in
“Connecting Data and
Power” on page 17
.
Figure 2-4: Hanging Dimensions and Clearances
Floor Mounting the Luminaire
VL500 wash luminaires are not designed nor sufficient to sit directly on its base (foot) in a floor
installation application without a suitable floor mount plate. When used in this type of application,
attach a floor mounting plate to the base and make sure the mounting surface is flat and sturdy. Be sure
to leave enough space around the luminaire to allow proper, uninterrupted airflow for cooling and
movement (
See “Hanging Dimensions and Clearances” on page 17.
)
Connecting Data and Power
A maximum of 32 luminaires may be connected in any one DMX data link.
Note:
This maximum limit applies to the luminaire "daisy chain" only. Your system or console may
require fewer luminaires on a single data link path. Consult your console documentation for more
information.
To connect power and data:
Step 1. Connect data cable from console to first luminaire in chain at DATA IN connector.
Step 2. If required, connect additional data cables from DATA THRU connectors to DATA IN
connectors of remaining luminaires in link.
Summary of Contents for VL500 Wash Luminaires
