Vari Lite VL500 Wash Luminaires, User Manual

Page: 32 / 84

VARI
❋
LITE
®
- VL500™ W
ASH
L
UMINAIRE
U
SER
’
S
M
ANUAL
16 01-March-2006 02.9685.0001 0
Installing in Truss:
Step 1. Using two people, lift luminaire into mounting
position.
Step 2. Secure in place with truss hook. Ensure truss hook
hardware that locks hook in place (e.g. wing bolt) is
properly tightened and that luminaire is fully
supported.
Step 3. Attach safety cable (as required) as follows:
a. Connect end of cable to luminaire cable mounting
hole on front of foot.
b. Loop at least once around truss/pipe and attach other end of cable to cable mounting
hole.
Figure 2-3: Safety Cable Installation
Safety Cable :
Recommended for hanging installations.
May be required by local codes.
Note:
Some components not shown for clarity
Base
(Foot)