Vari Lite VL3500 Spot Luminaire, User Manual

Page: 67 / 88

M
ENU
S
YSTEM
: M
ENU
F
UNCTIONS
4
0 2 . 9 6 8 6 . 0 0 0 1 A 21 - De cem be r- 20 07 49
Inv Pan Invert Pan Reverses pan action for special focus requirements.
Inv Tilt Invert Tilt Reverses tilt action for special focus requirements.
Lamp Lamp Accesses lamp power-up options, reset and information ( Config ) or tests
Lamp function ( Test ).
Lamp
Hours
Lamp Hours Displays total number of lamp operating hours.
Lamp Level Lamp Power
Level
Displays lamp power levels: 1500W , 1200W , or 900W .
Lamp OFF Lamp is Off Configures arc luminaire so that lamp will not strike upon power up.
Lamp ON Lamp is On Configures arc luminaire so that lamp will strike upon power up.
Lum ID Luminaire ID Displays unique luminaire ID number.
Magenta Magenta Specifies magenta parameter for manual control ( Manual ) or testing ( Test ).
Manual Manual Accesses options for luminaire mechanism control by entry of data values.
Movement Movement Enables or disables pan and tilt movement.
Normal Zoom Mode Zoom configuration is in normal mode.
OFF Off Turns off a function.
Off Time Display off time Shows the automatic shut-off time for the menu display.
OK Okay Indicates calibration has completed and no errors have occurred.
OK? Okay? Prompt for pressing [Enter] before an action is executed.
ON On Indefinitely Sets Menu Display to stay on until programmed otherwise ( Display ) or turns
on a function.
Pan Pan Specifies pan function for manual control ( Manual ) or testing ( Test ).
Pan/Tilt Pan/Tilt Accesses pan and tilt options for focus swap function, movement enable/dis-
able, manual control and testing.
PASS Test Pass Indicates that a test has passed.
Power Lamp Power Accesses options to turn lamp on or off.
Power Up Power Up Accesses options for lamp power up state.
PROG Programming Currently programming the new version of software.
Re Cal Recalibrate Recalibrates luminaire.
Reset
Default
Reset Defaults Resets default system configuration values.
Reset
Hours Reset Lamp
Hours
Resets lamp hour and strike counters. (For use when new lamp is installed.)
RUN TEST Run Test Indicates that a mechanism test is in progress.
Sensor Sensors Accesses sensor types for diagnostic testing.
Status Status/Error Allows scrolling through error list or displays OK if no errors.
Strobe Strobe Specifies strobe function for manual control ( Manual ) or testing ( Test ).
STST Sensor Test Indicates that a system sensor test is in progress.
Studio Zoom Mode Zoom configuration is in quiet mode for studio use.
Swap Swap Swaps pan/tilt action for special focus requirements.
Test Test Accesses diagnostic tests for internal mechanisms.
Tilt Tilt Specifies tilt function for manual control ( Manual ) or testing ( Test ).
Version Version Displays current software version date and time (in two pages).
Table 4-2: Menu Function Definitions (Continued)
Display Definition Purpose