background image

VLC5501 User manual

4

Product warranty and registration:

Warranty of this product is for 12 months. If you register this product on line, Vapormatic

will give a further 12 months warranty free, giving 24 months in total.

To register this product please go to:

www.vapormatic.com/vehiclesecurity

.

System components:

The Vapormatic security system is a unique, modular wireless protection system. This provides the
highest security level to protect your vehicle from unauthorized use. With the use of a keypad PIN code
or wireless Keypad Override Disc, it is very easy to identify the driver and allow the vehicle engine to
start.

The Vapormatic security system consists of the following elements:

Keypad module
Keypad Override Disc
Two immobiliser blocking modules
Plastic PIN code card,

 (For use when the Master PIN code has been lost or forgotten)

Keypad module:

Using the keypad module, the driver can enter his own PIN code followed by the # button, to provide
authorisation for the two immobiliser blocker modules to disarm.

There are two LED status lights, twelve soft key buttons and an internal buzzer.  By turning the
ignition on, the backlit keypad will become live, and the red LED will illuminate.  By entering any of
the stored authorisation codes correctly followed by the

#

button, the red LED will extinguish and the

green LED will illuminate, allowing the user to start the engine.

After a short period, the keypad backlight will dissipate leaving just the green LED status light on.

Passive arming:

If the ignition is switched off for less than 4 minutes (approx), there is no requirement to re-enter an
authorisation code, this is for your convenience.  If the ignition has been switched off for more than 4
minutes (approx), the system will re-arm itself, thus requiring an authorisation code or the supplied
Keypad Override Disc.

Status LED’s

Soft keys

Summary of Contents for VLC5501



















Reviews: