Vaporfi VEX 150 TC, Manual

Page: 5 / 17

5
www.vaporfi.com
TCR (M1, M2, M3):
TCR SETUP:
The VEX 150w TC mod offers the TCR function, which enables users to customize
their temperature control atomizers (Ni, Ti, SS). To enter TCR mode, press the power
button three times, once you have entered the mode menu, press the + button until
you see the TCR mode. While the mode is still flashing you can press the – button to
scroll through the set memories (M1, M2, M3), once entered only the memory setting
will flash. Now press the + button to choose a memory and follow that by pressing the
power button to confirm.
With the device turned off, hold the power button and + button for five seconds.
Once you have entered the TCR menu, press the + or - button to choose a memory.
You will then press the power button to enter your parameter setting. Press the + or -
button to set the parameter for your atomizer. Then hold the fire button to confirm.
EXTRA FEATURES:
1. NEW COIL/SAME COIL PROMPT
When replacing your atomizer, especially from a nickel atomizer to a temperature
controlled atomizer (Ni, Ti, SS 316), you will be required to reset the resistance of that
atomizer. This helps the device recognize that the new atomizer is to be used at room
temperature, which ensures that you will not experience a burnt hit, if properly
primed. When prompted press the + button to indicate that the replacement atomizer
is new. If you are using the same atomizer and are prompted, press the – button
indicating that the atomizer is the same.