Vaporfi VEX 150 TC, Manual

Page: 4 / 17

If you are planning to use an atomizer in one of three temperature modes, press the
power button 3 times to enter the designated menu. Once in the menu, press the –
button, you will notice that the modes will begin to flash. Now, press the + button to
scroll through the different modes. Once you have found the correct mode for your
atomizer, you are now ready to vape in temperature control mode. Using the + and –
4
www.vaporfi.com
Note:
When using new atomizers in temperature control mode, it is important to
start at lower temperatures to avoid burning your atomizer.
SWITCHING FROM CELSIUS
TO FAHRENHEIT:
CHANGING WATTAGE IN
TEMPERATURE CONTROL:
Switching from Celsius to Fahrenheit or vice versa is fairly easy. Hold the + button to
increase the temperature, until you’ve reached the maximum temperature (315
degrees Celsius or 600 degrees Fahrenheit). Once you reach the maximum
temperature, press the + button once more to complete the switch.
Wattage can be adjusted in Temperature Control Mode. Press the power button three
times to enter the menu. By pressing the – button twice, you will notice the wattage
will begin to blink. Then, press the + button to increase this number to the desired
wattage. Now, press the power button to confirm.
When replacing your atomizer, especially from a nickel atomizer to a temperature
controlled atomizer (Ni, Ti, SS 316), you will be required to reset the resistance of that
buttons you can adjust your temperature (ranges from 100-315 degrees Celsius to
200-600 degrees Fahrenheit) to find the best temperature for your e-liquid.
atomizer. This helps the device recognize that the new atomizer is to be used at room
temperature, which ensures that you will not experience a burnt hit, if properly
primed. When prompted press the + button to indicate that the replacement atomizer
is new. If you are using the same atomizer and are prompted, press the – button
indicating that the atomizer is the same.