25
abnormal status found.
3. Call our after service center warranty replacement parts.
CLEANING
ENAMELING CLEANING
Always use the mildest cleaning the enameling parts.
DO NOT USE ACID DETERGENT AND/OR ANTIRUST TO CLEAN THE CONTROL
PANEL WITH PRINTING. SUCH STRONG CLEANSER MAY CLEAN OFF THE
PRINTING.
COOKING AREA CLEANING
The easiest way to clean the grill is to clean immediately after turning off the flame and
cooking is completed. Wear a barbeque mitt to protect your hand from the heat and steam.
Dip a brass bristle barbeque brush in tap water and scrub the hot grill. Dip the brush
frequently in the water. Steam, created as water contacts the hot grill, assists the cleaning
process by softening any food particles. The food particles will fall and burn. Never immerse
a hot part in water.
GRILL BURNER CLEANING
1. Be sure the tank valve and the knobs are in the “O” position. Make sure the grill is cool.
2. Clean the exterior of the burner with a wire brush. Clear stubborn scale with a metal
scraper. Clear any clogged ports with a straightened paper clip. Never use a wooden
toothpick as it may break off and clog the port.
3. Please note if insects or other obstructions are blocking the flow of gas through the
burner, you will need to call our customer service line.
VERY IMPORTANT: The orifice of the valve must be located in the center of burner
section after move and clean. Otherwise, it may cause serious body injury and
property damage. Swing the burner slightly after replaced to check whether it is
installed properly.
Never dismantle the setting device.
The frequency to clean the burner relies on how often you use the grill.
GREASE
TRAY
CLEANING
The grease tray should be emptied and wiped down periodically and washed in a mild
detergent and warm water solution. A small amount of sand or cat litter may be placed in
Summary of Contents for GD4819S
Page 4: ...4 2 Parts Diagram ...
