Vantron
|
Embedded in your success, Embedded in your better life
World-leading provider of embedded/IoT products and solutions
IBOX66 | User Manual
4
Precautions for Power Cables and Accessories
Use proper power source only. Make sure the supply voltage falls within the specified
range. The Product is designed to use 9-36V DC. Always check whether the Product is DC
powered before applying power.
Place the cables properly at places without extrusion hazards.
Use only approved antenna(s). Non-approved antenna(s) may produce spurious or
excessive RF transmitting power which may violate FCC limits.
Cleaning instructions:
•
Power off before cleaning the Product
•
Do not use spray detergent
•
Clean with a damp cloth
•
Do not try to clean exposed electronic components unless with a dust collector
Power off and contact Vantron technical support engineer in case of the following faults:
•
The Product is damaged
•
The temperature is excessively high
•
Fault is still not solved after troubleshooting according to this manual
Do not use in combustible and explosive environment:
•
Keep away from combustible and explosive environment
•
Keep away from all energized circuits
•
Unauthorized removal of the enclosure from the device is not allowed
•
Do not change components unless the power cable is unplugged. In some cases, the
device may still have residual voltage even if the power cable is unplugged.
Therefore, it is a must to remove and fully discharge the device before replacement
of the components.
