Vantron
|
Embedded in your success, Embedded in your better life
World-leading provider of embedded/IoT products and solutions
IBOX66 | User Manual
17
2.2
Connecting a Host Computer
1.
Insert one end of a display cable to the eDP/LVDS/HDMI interface
of
the Device and
the other end to a host computer;
The display cable shall vary with the ports to be connected, and adapter connectors
are sometimes needed. HDMI interface for illustration here.
2.
Connect the mouse and keyboard to the USB interfaces on the Device for easier
operation;
3.
To use the Device as an ADB device, dial the OTG switch up and insert a USB cable
(Type-A male to Type-A male) into the USB OTG port to connect the Device and the
host computer;
If you connect a touch monitor other than a host computer, remember to use the data
cable included in the package of the touch monitor to connect the touch monitor and
IBOX66 to enable touch control.
USB OTG OTG switch
