Vantron
|
Embedded in your success, Embedded in your better life
World-leading provider of embedded/IoT products and solutions
IBOX3588 | User Manual
3
General Safety Instructions
The Product is supposed be installed by knowledgeable, skilled persons familiar with local
and/or international electrical codes and regulations. For your safety and prevention of
damage to the Product and other equipment connected to it, please read and observe
carefully the following safety instructions prior to installation and operation. Keep this manual
well for future reference.
•
Do not disassemble or otherwise modify the Product. Such action may cause heat
generation, ignition, electronic shock, or other damages including human injury, and may
void your warranty.
•
Keep the Product away from heat source, such as heater, heat dissipater, or engine casing.
•
Do not insert foreign materials into any opening of the Product as it may cause the
Product to malfunction or burn out.
•
To ensure proper functioning and prevent overheating of the Product, do not cover or
block the ventilation holes of the Product.
•
Follow the installation instructions with the installation tools provided or recommended.
•
The use or placement of the operation tools shall comply with the code of practice of
such tools to avoid short circuit of the Product.
•
Cut off the power before inspection of the Product to avoid human injury or product
damage.
