Van's Aircraft RV 12iS, Production Acceptance Procedures

Page: 21 / 50

Revision: 2.3 Date: 10/30/20
G8-1
Section G8 - Fuel System Calibration

Roll aircraft onto 1 inch (2.5 cm) blocks under main wheels and chock wheels. Check the
canopy decks for level and shim nose wheel as required.

Master switch “ON”.

Record “empty” sensor value:______, add 2.1 gallons for first 2 gallon interval and record fuel

Add fuel incrementally and map quantity indication.
Note: sensor value will stop changing at just over 16 gallons due to design limits of
sensor actuation range.
total:____
sensor value:______ visual gauge:_______
total:____ sensor value:______ visual gauge:_______
total:____ sensor value:______ visual gauge:_______
total:____ sensor value:______ visual gauge:_______
total:____ sensor value:______ visual gauge:_______
total:____ sensor value:______ visual gauge:_______
total:____ sensor value:______ visual gauge:_______
total:____ sensor value:______ visual gauge:_______
total:____ sensor value:______ visual gauge:_______
total:____ sensor value:______ visual gauge:_______

Calibrate fuel quantity indication according to EFIS manual.
Section G8 checks completed by:
Printed Name/Title Aircraft Serial Number
Signature Date