background image

Owners Manual

SILENT RUNNER INVERTER/CHARGER POWER SYSTEM

25

ý

þ

ÿ

9

 

International and North American Warranties

____________________________________________________________________________________

International Limited Warranty

__________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________

Vanner Inc., referred to herein as Vanner, warrants that this product is free from defects in materials and

workmanship for a period of two (2) years from date of installation or two and one half (2½) years from date of

manufacture,  whichever is less if and only if the following requirements are complied with:

1. The product is installed and checked out properly according to all guidelines, instructions, and checkout

procedures set forth in the product Installation and Operating Manual.

2. The installer records all checkout data required and completes, signs, and returns the warranty

registration card to Vanner within ten (10) days after installation.

Vanner does not warrant its products against any and all defects when: defect is a result of material or workmanship

not provided by Vanner; normal wear and tear, or defects caused by misuse or use is contrary to instructions

supplied, neglect, accident, reversed polarity, unauthorized repairs and/or replacements.

All warranties of merchantability and fitness for a particular purpose: written or oral, expressed or implied, shall

extend only for a period of two (2) years from date of installation or two and one half (2½) years from date of

manufacture, whichever is first.  There are no other warranties which extend beyond those described on the face of

this warranty.

Vanner does not undertake responsibility to any purchaser of its product for any undertaking, representation, or

warranty made by any dealers or distributors selling its products beyond those herein expressed unless expressed in

writing by an officer of Vanner.

Vanner does not assume responsibility for incidental or consequential damages, including, but not limited to

responsibility for loss of use of this product, removal or replacement labor, loss of time, inconvenience, expense for

telephone calls, shipping expense, loss or damage to property, or loss of revenue.

Vanner reserves the right to repair, replace, or allow credit for any material returned under this warranty. Any

damage caused by the customer will be charged or deducted from the allowance.

All warranty work will be performed at Vanner’s factory, or authorized repair facility utilizing a valid Warranty

Authorization Number (WAN) prior to repair.  Products shall be delivered to Vanner’s facility, freight prepaid and

fully insured.  Transportation charges, fees, duties and export documentation are the responsibility of the product’s

owner.

Summary of Contents for Silent Runner SRC12-1100PT





























Reviews: