Owners Manual
SILENT RUNNER INVERTER/CHARGER POWER SYSTEM
11
q
r
s
t
u
v
t
u
wx
y
z
Inverter Lights
(1)
ON/OFF/RESET
The ON/OFF Switch is a pushbutton switch used to turn only the inverter ON/OFF and is used as a RESET
Switch. When the inverter has automatically shut itself OFF due to a fault, the inverter must be RESET by
turning the ON/OFF Switch OFF or by turning a remote switch OFF. (If an automatic shutdown has
occurred due to a fault, one of the fault indicator lights will be displayed until the inverter is RESET)
(2)
“Inverter” Indicator Light
Light Display Description
No light
Inverter is OFF
Solid Green
Inverter is ON and is producing AC power
Blinking Green
Inverter is in Load Demand Mode
(3)
“Battery Low” Indicator Light
Light Display Description
Red Light is ON
The inverter is ON and battery voltage has decreased to less than 11 volts DC.
Automatic inverter shutdown for low battery at 10.5 volts is imminent unless
the battery voltage is increased.
Blinking Red Light
The inverter has shutdown due to a low battery voltage dropped below 10.5
volts.
(4)
“Over Temp” (Temperture) Indicator Light
Light Display Description
Red Light is ON
The inverter has shut itself OFF due to excessive heating. Check for blocked
vents or any type of air obstruction to the inverter. The Inverter will
automatically restart when the inverter cools down.
(5)
Overload Indicator Light
Light Display Description
Blinking Red
The inverter has shut itself OFF due to overload. The Inverter ON/OFF Switch
must be cycled to reset and restart the inverter.
Charger Lights
(6)
“BULK/ABSORPTION” Indicator Light
(See ‘Battery Charger Theory of Operation’ for battery charging performance details.)
Light Action Description
Blinking Yellow
The unit is in Charger Mode (shore power is ON) and the charger is in either
the BULK STAGE or ABSORPTION STAGE of the battery charging cycle.
