background image

PURE BREEZE FUME HOOD

120V

25799 Jefferson Ave.

  

  

Murrieta, CA 92562

 

  

1-800-VANIMAN (826-4626)

  

  

www.vaniman.com

  

 

 

[email protected]

10370-11/21 PAGE 7

Page 7

READ AND SAVE THESE INSTRUCTIONS

MAINTENANCE

1.  WARNING 

- TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK, OR INJURY TO PERSONS, 

OBSERVE THE FOLLOWING:

a. Use this unit in the manner intended by Vaniman. If you have any question about the use of this 

product, please contact Vaniman directly.

b. Before servicing or cleaning this unit, switch power 

Off

 at the service panel and lock the service 

disconnecting  means  to  prevent  power  from  being  switch 

On

  accidentally.  When  the  service 

disconnecting means cannot be locked, securely fasten a prominent warning device, such as a 

tag, to service the panel.

c.  When  servicing  or  replacing  components,  unplug  the  power  cord  to  ensure  that  the  unit  is 

disconnected to the power supply. Once servicing or component replacement is complete, confirm 

that the safety devices are reinstalled or remounted as previously installed by Vaniman.

d. Do not use this unit’s fan with any solid-state speed control devices.
e. Do not operate any fan with a damaged cord or plug. Discard cord or plug or return to Vaniman 

for examination and/or repair.

f.  Do not run cord under carpeting. Do not cover cord with throw rugs, runners, or similar coverings. 

Do not route cord under furniture or appliances. Arrange cord away from traffic areas and where 

it will not be tripped over.

Summary of Contents for VMC-A450








Reviews: