Operating Procedures
EZCT™
and
EZCT-
10
36
6.7 Computer Interface Procedure
This procedure describes the steps to put the EZCT in computer interface mode. In this mode the
PC software can retrieve and store test records stored in the EZCT. It can also generate test
r
e
c
or
d
he
a
de
r
I
D
i
nf
or
ma
t
i
on
a
nd
downl
oa
d
t
he
m
t
o
be
s
t
or
e
d
i
n
t
he
EZCT’
s
r
e
c
or
d
I
D
di
r
e
c
t
or
y.
The software can also setup and control the EZCT to run any test available from the Front Panel
Table 14 Computer Interface Procedures
STEP
ACTION
EZCT
DISPLAY
14-1
On the MAIN MENU, press key #2
(SETUP) to select the SETUP MENU
options (shown at right).
14-2
Press key #4 (NEXT PAGE)
14-3
Press key #1 (COMPUTER CONTROL) to
place the EZCT
unde
r
a
n
e
xt
e
r
na
l
PC’
s
control.
NOTE
To end the PC control mode, press the
STOP key. This will restore control to the
EZCT keypad and return the LCD to the
MAIN MENU display.
This ends the Computer Interface Procedure.
1.COMPUTER CONTROL
2.SET TIME
3.KNEE POINT MARKER
4.SET Z PRINT ON/OFF
COMPUTER ITF MODE
1.ENTER ID
2.PRINT RECORD
3.RESTORE RECORD
4.NEXT PAGE
