Operating Procedures
EZCT™
and
EZCT-
10
18
Table 5 Run Excitation and Ratio Test (continued)
STEP
ACTION
DISPLAY
5-17
To run another test, press Key #1 (YES) and
return to step 5-3.
If testing is complete, press key #2 (NO).
5-18
Press key #1 (YES) to save the record. Test
record number will be displayed.
If the user selects not to save test record
(Press key #2), a reminder message is shown
in 5-20.
NOTE
The EZCT will assign a record number for
the test record saved in FLASH EEPROM.
5-19
Press the STOP key to return to the main
menu.
5-20
None. The user selected not to save the test
record; a reminder message is displayed
5-21
Press key #2 to save record. Continue on 5-
18
Press key #1 to abort save record, the EZCT
will return to MAIN MENU.
NOTE
A typical test contains a excitation and turns ratio test. A record may contain 10 tests.
An EZCT will store 128 records.
This ends the RUN TEST procedure.
RECORD NUMBER 3
HAS BEEN SAVED!
SAVE THIS RECORD?
1.YES
2.NO
1.RUN TEST
11/27/06
2.SETUP
09:45:00
3.DIAGNOSTIC
ARE YOU SURE?
DATA WILL BE LOST!
1.DO NOT SAVE RECORD
2.SAVE RECORD
1.RUN TEST
11/27/06
2.SETUP
09:45:00
3.DIAGNOSTIC
