Operating Procedures
EZCT™
and
EZCT-
10
26
6.2.2 EZCT Test (Shot) Record ID Directory
The EZCT can store 10 test record IDs in its internal memory. The test record IDs are generated
by using the Current Transformer Analysis Software PC program. Once the test ID is generated,
it can be downloaded and stored in the EZCT via the RS-232C interface.
This feature allows the user to pre-program test record header information in the office for field
use. The user can quickly load test record header information from memory, rather than manually
entering the header information via the keypad.
The
f
ol
l
owi
ng
pr
oc
e
dur
e
pr
i
nt
s
a
l
l
t
he
t
e
s
t
r
e
c
or
d
I
Ds
s
t
or
e
d
i
n
t
he
EZCT’
s
me
mor
y.
Table 8 Print Test Record ID Directory Procedure
STEP
ACTION
EZCT DISPLAY
8-1
On the MAIN MENU, Press key # 2
(SETUP) to go to the Setup menu options
(shown at right).
8-2
Pr
e
s
s
ke
y
#1
t
o
s
e
l
e
c
t
“
RECORD
I
D”
8-3
Press key # 3 to print the shot ID directory.
The display will return to the MAIN MENU
after the directory is printed.
Test record ID directory is shown in figure 10.
1.RECORD ID
2.PRINT RECORD
3.RESTORE RECORD
4.NEXT PAGE
1.ENTER SHOT ID
2.LOAD ID FROM MEM
3.SHOT ID DIRECTORY
1.RUN TEST
07/06/06
2.SETUP
16:27:00
3.DIAGNOSTIC
