www.vanco1.com
800.626.6445
17
6.6 Access Tab
•
Here you can change the admin password, and lock the front panel”
7 IR Control
7.1 IR Remote Control
•
Press the STANDBY (1) button to enter or exit standby mode.
•
To switch the selected input for one or more of the outputs, press
the number corresponding to the desired INPUT (2), then press one
or more OUTPUTS (3) or the ALL (4) button, then press the ENTER
(4) button to execute the change.
•
Examples:
•
To send input 3 to output 2, first press the INPUTS 3 button, then
press the OUTPUTS 2 button, and finally press the ENTER button to
execute the change.
•
To send input 1 to outputs 1 and 4, first press the INPUTS 1 button,
then press both the OUTPUTS 1 and 4 buttons, and finally press the
ENTER button to execute the change.
•
To send input 4 to all outputs, first press the INPUTS 4 button, then
press the ALL button, and finally press the ENTER button to execute
the change.
•
To set the EDID for one or more source devices to the EDID
capabilities of a specific output, press the EDID (4) button, then
press the desired INPUTS (2) or the ALL (4) button, then press the
OUTPUTS (3) button corresponding to the desired display, finally
press the ENTER (4) button to execute the operation.
•
CLEAR (4): Press the CLEAR button if want to withdraw an operation
before the ENTER button comes into effect, meanwhile, the matrix
will return to the previous status.