www.vanco1.com
800.626.6445
15
•
Local: The RS-232 port of matrix switcher
•
Baud Rate: 9600
•
Command Ending: NULL, CR, LF or CR+LF can be chosen
•
Command: Type the command in this box to control the third-party device which is connected to the RS-
232 port of the matrix switcher. If click the HEX, the RS-232 commands can be typed with hexadecimal
value
2) HDBT (RS-232 pass-through settings on the EVRXHD2 and EVRXDSC receivers)
•
HDBT: The RS-232 port of the HDBaseT receiver
•
Port: Select one of HDBT outputs which are connected to the HDBaseT receivers which must have third-
party device connected
•
Baud Rate: Supports 2400, 4800, 9600, 19200, 38400, 57600 or 115200
•
Command Ending: NULL, CR, LF or CR+LF can be chosen
•
Command: Typing the commands in the box to control the selected remote third-party device which is
connected to HDBaseT receiver. If click the HEX, the RS-232 commands can be typed with hexadecimal
value