V&P Scientific, Inc.
3
Technical Note 378B
4.
Connect Power Cable from Power Supply to Controller.
WARNING
Do not plug Controller in while power is on. Ensure that the Power Switch is in the off position
(“0”
is down). Always have Controller plugged in before powering up.
5.
Connect Controller Cable from the Motor Unit to the Controller.
6.
Connect the USB Cable from the Controller to the computer.
7.
Place one VP 830SV-650CFB SpinVessel® tube into the Spin Cup. Ensure that the
SpinVessel® tube is seated securely within the Spin Base.
Controller
Cable
Controller
Motor
Unit
Power
Supply
Power
Cable
Power
Cord
USB
Cable
Spin
Base
Registration Disc
VP 830SV-1L-FB
