Vanco EVMX4X3 Manual Download Page 8 | Manualshive

Page: 8 / 24

background image

www.vanco1.com

800.626.6445

8

1. Connect HDMI sources to the HDMI inputs of the EVMX4X3 (NOTE: HDMI certified cables are strongly

recommended for 4K HDR resolution)

2. Connect Cat6 cables from the matrix unit outputs to each display location (NOTE: home run Cat5e/6

cables are strongly recommended as any coupling points such as punch down RJ45 jacks, female/female
RJ45 jacks, etc. can cause signal degradation. Patch panels will cause even more signal degradation.)

3. Connect the HDBaseT Receivers to outputs 1-3, option of either the EVRXHD2 or EVRXDSC; connect

HDMI cables from the receivers to each HDMI display (NOTE: HDMI certified cables are strongly
recommended for 4K HDR resolution)

4. Connect an HDMI display to output 4 (NOTE: HDMI certified cables are strongly recommended for 4K

HDR resolution)

5. OPTIONAL: Connect an external amplifier or AV Receiver to the digital and/or analog output (NOTE: both

the digital optical and analog RCA audio breakouts follow output 4 only)

6. OPTIONAL: Connect a router or ethernet switch to the TCP/IP RJ45 jack on the EVMX4X3, this will

connect the matrix unit to the network, and can be controlled via IP

7. Connect the included power supply

CONNECT AND OPERATE

«
...
6
7
8
9
10
...
»

Summary of Contents for EVMX4X3

























Reviews:

No comments

Related manuals for EVMX4X3

Brand: N-Tron Pages: 18

Xbox One Media Hub

Brand: Collective Minds Pages: 19

DigiTOOLS VS-41USB

Brand: Kramer Pages: 8

TK-205K - PS/2 KVM Switch

Brand: TRENDnet Pages: 11

Brand: Comm-Tec Pages: 48

Brand: Lightwave Pages: 53

Brand: JetNet Pages: 20

IES2100SL Series

Brand: 3onedata Pages: 3

LMP-0602 24-V2 Series

Brand: ANTAIRA Pages: 2

Brand: Key Digital Pages: 20

AVlink VAX-8404F

Brand: C&C TECHNIC Pages: 2

Brand: Zhuoyi Pages: 2

Brand: Extron electronics Pages: 1

Brand: Lancom Pages: 71

Brand: Comnet Pages: 105

Brand: ATEN Pages: 15

Brand: Tripp Lite Pages: 9

Brand: Pakedge Device & Software Pages: 8

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands