Vancare C450, Technical Manual

Page: 13 / 50

PNEUMATIC INSTRUCTION SHEETS
P1 - Replace Airline Tubing
IMPORTANT NOTE:
If an air leak is suspected, it is important to check the entire pneumatic
system for air leaks.
1.
Separate the Airline tubing from the grommet on the lift unit.
2.
Take note of the force required to separate these items. The connection should be very tight.
If the connection appears somewhat loose, an air leak may develop and cause a problem.
3.
Air leaks occur at the grommet connections because the hand control and airline tubing are
frequently used to pull the lift along the track. This results in the frequent disconnection of the
airline and grommet.
4.
Remember to reassemble the airline to the grommet by aligning the ribs.
If not connected
correctly, operating buttons on the hand control will not function properly.
Separate airline Rejoin airline
C-450/C-625 Technical Manual 031417 Page 13