AIR N ARC
®
150 SERIES
SECTION 7: ILLUSTRATED PARTS LIST
090043-OP_r0 (MARCH - 2015)
PAGE - 125
VANAIR MANUFACTURING, INC.
(800) 526-8817 • www.vanair.com
1. Hose is weakened when installed in
twisted position. Pressure in twisted hose
tends to loosen fitting connections. Design so
that machine motion produces bending rather
than twisting.
2. Ample bend radius should be
provided to avoid collapsing of line and
3. Exceeding minimum bend radius will
greatly reduce hose assembly life.
4. Use elbows or other adapters as
necessary to eliminate excess hose length
and to insure neater installation for easier
5. When hose assembly is installed in a
flexing application, remember that metal hose
fittings are not part of the flexible portion.
Allow ample free length for flexing.
6. When properly routing, use clamps to
secure the hose in its proper position.
7.16 HOSE INSTALLATION GUIDE
