VAN WAMEL Perfect ZF2, Owner'S Manual

Page: 20 / 59

18
out, power transmission isn
’
t
optimal)
Pulleys not correct in line Align the pulleys correctly
Cutting height too low adjusted Check rear roller adjustment and
change that when necessary
Gearbox overheated Oil level low Olie tot pijp aanvullen
Oil too old Tandwielkast reinigen en olie
verversen
Flail rotor / machine is
overloaded Slow down speed and or check rear
roller adjustment
Oil loss from gearbox Oil seal(s) damaged / worn out Change oil seal(s)
Machine has Machine has high
wear and tear Cutting height too low adjusted Check rear roller adjustment and
change that when necessary
No original parts
–
vibrations in
machine
Fit original
Perfect
parts
Break off / bend parts Machine is involved in a collision
or damaged by pollution Change defect parts and when
necessary must the flail rotor
balanced