11
4.13
BLUE COLOR
Adjust the value using
and
buttons.
+ 50
Blue Color
-
4.14
EXIT AND SAVE
Pressing the
button to save changed value and exit.
+ Yes
Exit And Save
- No
5
Driver Installation
5.1
Touchscreen
Important Note:
A new calibration is always necessary if another touch
screen was connected to the computer or if the screen
resolution was changed. This means that the calibration
between touch screen and computer is adjusted to the
mechanical features of the particular touch screen which was
connected to the computer at that time.
A serial Touch Controller is integrated into the Touch
Commander. The default setting is 9600 Bps. Normally this is
clearly recognized by the setup programs. If, however, it is
not clearly recognized, the adjustment can be done manually
or by restarting the corresponding setup program.
Information for the driver installation is in the file:
D:\ Document \TouchKit Manual v3.1.4.pdf