12
You can find detailed information in the path, named with your operating
system. (The CD-ROM drive of your Tocuh-CD is here defined with the letter
„D“).
5.2
Magnetic Card Reader Setup
The setup utility can be found on the installation CD at:
D:\MSR\SETUP.EXE
(Drive D:\ shown above may vary on each system.)
5.3
Diagnostics Utility
The diagnostic program COMDUMP is located in the path D:\TOUCH\ and must be
used in DOS or command prompt mode.
Usage: COMDUMP <number of COM port 1 or 2> [baud rate]
(Baud rate is optional).
COMDUMP will display data from the touchscreen to the selected COM port in
hex format.
6
Maintenance and Care
Before cleaning, switch off the power supply. A soft cloth moistened with a
mild cleaning agent can be used for cleaning the housing. For cleaning the
screen it is better to use a soft paper towel moistened with a mild
household cleaning agent. For cleaning the surface do not apply the
cleaning liquid directly but use a moistened paper towel. Please avoid
getting liquid into the housing.
7
General Points
Attention:
The Touch / Screen Commander do not contain any electronic
components that can be replaced or repaired by the user.
Consequently you should not try to do your own repair work.
Moreover, you would lose all warranty claims for this
product. Activating the touch sensor surface must not be
done with a sharp object, such as credit card, long finger
nails, ring, etc. Sharp or pointed objects will cause damage
to the touch sensor and are not covered under warranty
If the Touch/Screen Commander must be returned for service, it must be
packed in it's original packing material. If this is not done, the sender
will be made responsible for possible transport damage.
