Van der Ende Groep B.V. · Aartsdijkweg 23, 2676 LE, Maasdijk · Telefoon 0174 515050
IBAN NL71 RABO 0340341610 · KvK Den Haag 27230471 · Btw-nummer NL8000.78.378.B01 · [email protected] · www.vanderendegroep.nl
Pagina 8 van 21
3. Safety instructions
Always make sure that the plug of the Airmix™ is disconnected from the power supply before working
on it! This prevents the fan starting unexpectedly or unintentionally.
Do not connect the fan or the gear-rack drive to the power supply until assembly has been completed
and the system has been suspended.
Only use self-locking nuts to assemble and mount the Airmix™! Failure to do so may result in parts
vibrating loose and falling off.
4. Installation
This chapter describes installing the Airmix™. The fan still has to be attached to the aluminium
housing. There is also an explanation of how to install the spacer and extension piece. Read the entire
manual before starting work.
4.1 Contents of the installation kit
Quantity Description
Type
Airmix™
1
Fan
0.38 kW
230 V, 50 Hz
1.7 A
5,000 m
3
/hour
Insulation class IP 54
1
Power supply cable
5-m cord plus Type F earthed plug
1
Airmix™ (excluding fan)
Incl. gear-rack drive
24 V AC 50/60 Hz. 24 V DC, 1.5 W
operating range AC/DC 19.2 to 28.8 V
duration 116 s
IP54
torque 150 N
5-m 3 x 0.75 mm² cable without plug
8
Lock nut and washer
Stainless steel M10
1
Attachment of Airmix™ to truss lattice 2 M8 U-clamps U50x50 or U60x55
4 M8 fender washers
4 M8 hexagonal lock nuts
Extension
1
Extension
Customer-specific component. The length of the
extension depends on the height which has to be
bridged.
Spacer
1
Spacer
Customer-specific component. The length of the
spacer depends on the gap between the two
screen cloths.
1
Attachment of the spacer to the truss
lattice
2 M8 U-clamps U50x50 or U60x55
4 M8 fender washers
4 M8 hexagonal lock nuts
Extra
1
Valve position sensor
60
0
/1 KΩ incl. 2 M5 washers and 2 M5 lock nuts
1
Connection of the valve position
sensor to the gear rack
Clamp incl. 1 M4x16 hexagonal bolt, 1 M4
hexagonal nut and 1 M4 spring ring
Table 2 Contents of the installation kit
