Van der Ende Groep B.V. · Aartsdijkweg 23, 2676 LE, Maasdijk · Telefoon 0174 515050
IBAN NL71 RABO 0340341610 · KvK Den Haag 27230471 · Btw-nummer NL8000.78.378.B01 · [email protected] · www.vanderendegroep.nl
Pagina 10 van 21
4.3 Attaching the fan
After the Airmix™ housing has been suspended, the fan can be attached to it. It is more easy to
connect the power supply cable at the fan, before you attach the fan to the Airmix™ housing. Follow
the instructions in chapter 5. It is recommended that the supplied grille is mounted to the outlet side
of the fan. To attach the fan correctly, proceed as follows:
use proper tools and equipment;
make sure that the Airmix™ can be installed safely - get help if necessary;
what you will need:
o
8 M10 washers;
o
8 M10 lock nuts;
assembly (see Figure 4);
o
place the fan next to the Airmix™;
o
attach the fan to the Airmix™ by inserting it over the protruding M10 threads. Then
secure the fan with the supplied washers (1) and lock nuts (2);
Figure 4 Attaching the fan to the Airmix™
