3.12.2
Lifting/lowering indicator lights
The indicator lights indicate when the lower links are moving.
Lit indicator light indicates that the rear linkage is being used.
1
2
GUID-7C7F1615-C812-45F7-87E7-5A650E15CFFE
1. Lifting indicator light
2. Lowering indicator light
•
The lifting indicator (red) is lit when the lower links are lifting.
•
The lowering indicator (green) is lit when the links are lowering. The lowering
indicator light is lit also when rear linkage is set to floating position.
3.12.3
Activating the linkage
Use the lift/stop/lower switch to activate the linkage.
The linkage has to be activated every time the power has been turned on or
when the lifting/lowering switch or lifting/lowering push buttons have been used.
AU
TO
AUTO
CONTROL
1
GUID-25C8FC54-B730-4954-B4FA-84FA54411F8D
1. Lift/stop/lower switch
1. Press the lift/stop/lower switch rapidly two times to either of its extreme
positions.
Linkage activation requires two rapid presses of the lift/stop/lower switch for
safety. The latter of the presses defines the direction of the linkage
movement to be activated.
The diagnostic light goes out and the lower links move to the preset position.
The first movement is done at a reduced speed.
NOTE: The movement of the linkage can be stopped by pressing the lift/stop/
lower switch to the centre (stop) position.
3. Operation
- 169 -
Summary of Contents for T144
Page 1: ...OPERATOR SMANUAL TSERIES HiTech Ref no 39 892 21 3 08 2015 YOUR WORKING MACHINE...
Page 2: ......
Page 413: ......
