3. Do not fully press the clutch pedal if you want the tractor to move very slowly.
You can use this feature when attaching implements.
NOTE: When using the clutch to move the tractor very slowly, the coupling
point of the clutch may change and the clutch engages sooner.
WARNING: If the engine stops while the tractor is moving (for
example, the fuel has run out), do not press the clutch pedal down.
When the tractor is moving and the transmission is engaged, the
engine is running and there is pressure in the system. If you press
down the clutch pedal, the hydraulic pump does not run and steering
deactivates, because there is no hydraulic pressure in the system.
WARNING: Do not descend slopes with the clutch pedal pressed
down.
3.8.6.2
Adjusting the clutch pedal engagement position
You can adjust the clutch pedal's engagement position and clutch slipping
properties according to your preferences through the A-pillar display settings.
The index determines how quickly the clutch engages when the clutch pedal is
raised. The value range is between 1–4.
•
1 = the clutch engages quickly, the engagement point is relatively low.
•
4 = the clutch engages slowly, the engagement point is relatively high.
1. Press
to activate the A-pillar display.
2. Press
to enter the settings menu.
GUID-2408E592-046C-4CA8-AC4B-6E1939C132A7
Text “Ind” is shown.
3. Operation
- 106 -
Summary of Contents for T144
Page 1: ...OPERATOR SMANUAL TSERIES HiTech Ref no 39 892 21 3 08 2015 YOUR WORKING MACHINE...
Page 2: ......
Page 413: ......
